Xbox 360 Controller Mod for Rapid Fire, Melee and Sprint Button Relocation

If you are getting butt kicked at First Person Shooters, like Halo, Modern Warfare 2, or Battle Field 2, this set of simple controller hacks could even the playing field for you.  For the Rapidfire hack you don’t need to solder which is a huge plus, but if you want to relocate the Sprint and Melee buttons you will.  This is a completely doable do it your self that will take under an hour if you have ever used a soldering iron before download classic solitaire free of charge.

 

Xbox 360 Controller Mod for Rapid Fire, Melee and Sprint Button Relocation To start you need to remove the screws.  These are “Security Torx” but you can use a small straight head screwdriver just fine, though you may need some strong hands to get the screws to turn photos from dropbox.

Controller Mod for MW2, COD, BF2 and Halo There is a hidden screw under the label next to the battery pack, this lets Microsoft know that you voided your warranty download images sony xperia.

Exposed PCB on Modded Controller Once you have exposed the Circuit board you can star on the “hair trigger” hack to give you more rapid fire herunterladen.

Rapid Fire Xbox Controller Hack But first, we are going to do the “steady aim” hack by removing the force feed back motors that can cause our aim to wobble when we are shooting lustige sounds zumen.

Simple Hack for Xbox 360 Controller A piece of bent wire serves as a pin to stop the trigger from being fully depressed microsoft windows 10 herunterladen.

Faster Trigger for Semi Automatics It more or less just sit there herunterladen.

No Solder for this par of the hack But a little hot glue keeps it in place assassins creed vollversion kostenlos downloaden pc.

Your controller is now “rapid fire” with a hair trigger.

Controller Modding and Deformation To relocate the buttons first we have to make holes in the case for the microswitches, so we use the tip of the hot glue gun to melt a hole in the controller musiken kostenlos youtube. (this smells bad)

You can see my finger in the hole The finished holes should look pretty good because the plastic will warp, so you get nice edges amazon kostenlos bücher herunterladen.

Love the smell of superglue There are threads on the microswitch, but to make sure the switch stays in place a little superglue is not a bad idea.

Soldering microswitches Solder wires to the connections on the switch.

image Be careful not to heat the leads too much or you will melt the switch.

image Wire the other end of the leads to the places on the PCB where the analog sticks switches connect. (indicated with red dots on this image)

Put it all back together, and you are ready to play.

Finished Modded Controller in black

The Micro Switches were $5 at RadioShack, and are labled “Mini Momentary Button Switch”.