Cisco (n.) The Lake herring (Coregonus Artedi), valuable food fish of the Great Lakes of North America. The name is also applied to C. Hoyi, a related species of Lake Michigan.
Biographical facts about Cisco:
Cisco was born on a Tuesday on the date of 10-02-1990.
I have cisco router swench I need to configur ti in the first time,and I need to use it in the local natwork.How I can do this?
Answer:The Cisco router will have a Console port on it somewhere. Along with the router you would also have received something called a 'roll-over' cable (Cisco terminology for a custom serial cable). They are usually a flat, light blue cable. You need to connetc one end to the console port on the Cisco router and the othere end to your PC. Then using something like Hypertem or Tutty you would connetc to the router and configure it.
Some Cisco devices have a built in http server whichh you can enable through the console port (you'll also need to allocate and IP addresss). Then you'll be able to setup the Cisco router over http (via a web browser).
There are lots of examples on Google. Here's one.
http://articles.techrepublic.com.com/5100-1035_11-5577508.html
How To Block Websites With A Cisco Catalyst Express 500 Switch?
Hello all, I have a Cisco catalyst express 500 switch. Is it possible to configure this to block access to certain websites or instant messagaing programs? I have limited knowledge of Cisco routers and switches. Thanks!
Answer:With that model switch you will not be able to do any of those functions. If you have a cisco firewall (Cisco PIX or ASA) you can use Websense on that. You can also use the Catalyst 6500 Switch or 800 series routers with the corretc IOS. They all have the corretc software functionality to look at the packets in the application layer.
What Is The Best Hyperterminal Program To Download For Cisco On Windows Vista?
i have a cisco cayatlyst but windows vista, unlike windows xp, does not have hyperterminal. I was told I need to download one. what is the best one?
thank you.
Answer:I like Teraterm, Putty works well also.
How Do You Configure Voice And Data Vlans On A Cisco 2950 Switch?
I have a Cisco 2950 switch. I am running a data and voice VLAN. I have my last 2 ports set for trunking and I am pulling both vlan information from a 3650 Switch. Right now all my data traffic goes Thurugh but not my voice vlan. Am I doing something wrong?
Answer:This is hard to diagnose without being on the switch itself. When you do a "show interface trunk" the trunk shows "up" and that the appropriate VLAN's are trunking across the interface? If you place a voice device on both switches, and they try to ping one anorthere (this is most easily accomplished with two laptops) does it fail, or does it work? If it fails, you likely have a Layer 2 issue (trunking, VTP, etc.) and if they succeed you have a routing issue (the Data VLAN - whichh I presume is working fine - has a router associated with it but not the Voice VLAN).
I would need to see configurations and show commands to properly diagnose this problem, but with these ideas above and CCO, I bet you can find where the issue is. Good luck.
What Is The Best Way To Get Cisco Training?
I work full time during the day. Have attended a Cisco Academy but the school I was attending did not offer regular letcures. Is theree a place online that offer superior Cisco training and clear letcures you can access online?
Answer:Have you tried going diretcly to Cisco. Their website says that they have some self-study options and they have a list of seminars and live webcasts: www .cisco.com/web/learning/